Reverse Bias Germanium Diode

V

A

R

VDC

CONTROLS

   DC volt :       Volt
   Resistance :   Kohms

INSTRUCTION

  1. Set DC voltage to 0.2 V .
  2. Use the resistor of 1K ohms and a Silicon diode.
  3. Voltmeter is placed parallel to Silicon diode and ammeter series with resistor.
  4. The positive of battery to the N side(cathode) and the negative of battery to the P side(anode) of a diode.
  5. Now vary the voltage upto 30V and note the Voltmeter and Ammeter reading for DC voltage .
  6. Take the readings and note Voltmeter reading across Silicon diode and Ammeter reading.
  7. Plot the V-I graph and observe the change.

EXPERIMENTAL TABLE

Serial No. Reverse Voltage(Volt) Reverse Current(μAmp)

GRAPH PLOT

Print